Solwise EnGenius Wireless Access Point/ Client Bridge/Client Router
NET-EL-EOC-1650
- Access Point / Client Bridge / Client Router
- Includes Power over Ethernet Injector
- High bandwidth up to 54Mbps
- Ideal for linking two buildings across a courtyard or similar
- Built-in 7dBi internal directional antenna
- External Reverse SMA socket
- Suction cups included in the pack allow quick installation on a window or smooth surface
- Ideal for a sheltered location, such as a porch or shop window.
The EnGenius EOC1650 offers Access Point / Client Bridge / Client Router and high bandwidth up to 54Mbps. The EOC1650 is an ideal product for linking two buildings across a courtyard or similar to share internet connection around a property. It comes with a built-in 7dBi internal directional antenna along with a Reverse SMA socket allowing users to attach their own antenna for enhanced network coverage. Suction cups included in the pack allow quick installation on a window or smooth surface. Ideally the EOC1650 will be used in a sheltered location, such as a porch or shop window.
The EOC1650 features high transmitted output power and high receivable sensitivity. High output power and high sensitivity extends range and coverage to reduce the roaming between Access Points to ensure a stable wireless connection and reduce the expense of equipment.
It supports distance control ranges from 1km to 30km and the RSSI indicator enables the best transmitted and received signals for traffic communication. A Power over Ethernet injector is also included with the kit.
To protect wireless connectivity, the EOC1650 encrypts wireless transmissions through 64/128bit WEP data encryption and also supports WPA/WPA2. The MAC address filter lets you select exactly which stations should have access to your network. In addition, the User Isolation function can protect the private network between client users.
EnGenius covers this product with a 2 year manufacturer’s warranty.
Specifications:
Wireless:
2.4GHz It works in 2.4GHz frequency spectrum
High output power Transmit output power programmable for different country selections
High Data Rate High speed transmitting rate up to 54Mbps, support large payload such as MEPG video streaming
Multifunction application Access Point / Client Bridge / Client Router
Long range transmitting Transmit power control and distance control (ACK timeout)
Signal Strength LED indicators have the best transmit and receive signal for traffic communication
DD-WRT: DD-WRT is available for the 1650 but please take note that no support will be given when the unit is flashed with 3rd party firmware.
Networking:
Public wireless solution An AP interface that is especially useful in public areas such as hotspots and enterprise
Signal Strength Display RF signal strength status shown LEDs of 3 colors, making network build-up easier
QoS(WMM) Enhance performance and density
PPPoE Point-to-Point Protocol over Ethernet at Client Router mode. This function will keep trying when failed or disconnected
BSSID Basic Service Set ID, supports 4 MAC address
Security:
802.11i WEP, WPA, WPA2 (Encryption support TKIP/AES)
MAC address functions MAC address filter (AP mode)
802.1x IEEE802.1x Authenticator
L2 isolation
Station isolation
Management:
Firmware Upgrade Upgrading firmware via web browser, setting are reserved after upgrade
Reset & Backup Reset to factory default. User can export all setting into a file via WEB
MIB MIB I, MIB II(RFC1213), SNMP V1, V2c
Hardware Specification
Physical Interface: One 10/100 Fast Ethernet RJ-45
Reset Button
One SMA Connector
LED indicators:
1 x Power/ Status
1 x LAN (10/100Mbps)
1 x WLAN (Wireless is up)
3 x Link Quality (Client Bridge mode)
• Green: Good Quality
• Yellow: Marginally Acceptable Quality
• Red: Bad Quality
Power Requirements: Active Ethernet (Power over Ethernet) Proprietary PoE design
Power Adapter 24V / 0.6A DC
Regulation Certifications: FCC Part 15C/15B, EN 300 328/EN 301 489-1/-17
RF Specification
Frequency Band: 802.11b/g 2.412~2.472GHz
Modulation Technology: OFDM = BPSK, QPSK, 16-QAM, 64-QAM
DSSS = DBPSK, DQPSK, CCK
Operating Channels: 802.11b/g
11 for North America, 14 for Japan, 13 for Europe
Receive Sensitivity (Typical):
802.11g
-92 dBm @ 6Mbps
-74 dBm @ 54Mbp
802.11b
-97 dBm @ 1Mbps
-89 dBm @ 11Mbps
Internal Antenna: 1 x 7dBi Internal Panel Antenna
External Antenna: 1 x 5dBi Reverse SMA Antenna
Software Features
Topology: Infrastructure
Protocol / Standard:
IEEE 802.3 (Ethernet)
IEEE 802.3u (Fast Ethernet)
IEEE 802.11b/g (2.4GHz WLAN)
Operation Mode:
802.11 b/g
Access Point
Client Bridge
Client Router
LAN: DHCP Server, DHCP Client
Wireless:
Channel Selection (Setting varies by countries)
Transmission Rate
11 b/g:54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1 Mbps
Long distance transmission: 1km to 30km
Transmit power table
Signal Strength indication using LEDs (3 colors)
PPPoE (CR mode)
Security:
WEP Encryption-64/128/152 bit
WPA/WPA2 Personal (WPA-PSK using TKIP or AES)
WPA/WPA2 Enterprise (WPA-EAP using TKIP)
802.1x Authenticator
Hide SSID in beacons
MAC address filtering, up to 50 field
L2 isolation(AP mode)
Wireless STA (Client) connected list
QoS: WMM
Configuration: Web-based configuration (HTTP)
Firmware Upgrade: Upgrade firmware via web-browser, Keep latest setting when f/w update
Administrator Setting: Administrator password change
Reset Setting: Reboot (Press 1 second), Reset to Factory Default (Press 5 seconds)
System monitoring: Status, Event Log
SNMP: V1, V2c
MIB: MIB I, MIB II (RFC1213)
Backup & Restore: Settings through Web
Time setting: NTP (Auto-setting of time), Time setting manually
Temperature Range: Operating -20°C~70°C
Storage -30°C to 80°C
Humidity (non-condensing): 0%~90% typical
Dimensions: 192mm (L) x 48mm (W) x 36.2mm (H)
Weight: 250g
Wireless:
2.4GHz It works in 2.4GHz frequency spectrum
High output power Transmit output power programmable for different country selections
High Data Rate High speed transmitting rate up to 54Mbps, support large payload such as MEPG video streaming
Multifunction application Access Point / Client Bridge / Client Router
Long range transmitting Transmit power control and distance control (ACK timeout)
Signal Strength LED indicators have the best transmit and receive signal for traffic communication
DD-WRT: DD-WRT is available for the 1650 but please take note that no support will be given when the unit is flashed with 3rd party firmware.
Networking:
Public wireless solution An AP interface that is especially useful in public areas such as hotspots and enterprise
Signal Strength Display RF signal strength status shown LEDs of 3 colors, making network build-up easier
QoS(WMM) Enhance performance and density
PPPoE Point-to-Point Protocol over Ethernet at Client Router mode. This function will keep trying when failed or disconnected
BSSID Basic Service Set ID, supports 4 MAC address
Security:
802.11i WEP, WPA, WPA2 (Encryption support TKIP/AES)
MAC address functions MAC address filter (AP mode)
802.1x IEEE802.1x Authenticator
L2 isolation
Station isolation
Management:
Firmware Upgrade Upgrading firmware via web browser, setting are reserved after upgrade
Reset & Backup Reset to factory default. User can export all setting into a file via WEB
MIB MIB I, MIB II(RFC1213), SNMP V1, V2c
Hardware Specification
Physical Interface: One 10/100 Fast Ethernet RJ-45
Reset Button
One SMA Connector
LED indicators:
1 x Power/ Status
1 x LAN (10/100Mbps)
1 x WLAN (Wireless is up)
3 x Link Quality (Client Bridge mode)
• Green: Good Quality
• Yellow: Marginally Acceptable Quality
• Red: Bad Quality
Power Requirements: Active Ethernet (Power over Ethernet) Proprietary PoE design
Power Adapter 24V / 0.6A DC
Regulation Certifications: FCC Part 15C/15B, EN 300 328/EN 301 489-1/-17
RF Specification
Frequency Band: 802.11b/g 2.412~2.472GHz
Modulation Technology: OFDM = BPSK, QPSK, 16-QAM, 64-QAM
DSSS = DBPSK, DQPSK, CCK
Operating Channels: 802.11b/g
11 for North America, 14 for Japan, 13 for Europe
Receive Sensitivity (Typical):
802.11g
-92 dBm @ 6Mbps
-74 dBm @ 54Mbp
802.11b
-97 dBm @ 1Mbps
-89 dBm @ 11Mbps
Internal Antenna: 1 x 7dBi Internal Panel Antenna
External Antenna: 1 x 5dBi Reverse SMA Antenna
Software Features
Topology: Infrastructure
Protocol / Standard:
IEEE 802.3 (Ethernet)
IEEE 802.3u (Fast Ethernet)
IEEE 802.11b/g (2.4GHz WLAN)
Operation Mode:
802.11 b/g
Access Point
Client Bridge
Client Router
LAN: DHCP Server, DHCP Client
Wireless:
Channel Selection (Setting varies by countries)
Transmission Rate
11 b/g:54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1 Mbps
Long distance transmission: 1km to 30km
Transmit power table
Signal Strength indication using LEDs (3 colors)
PPPoE (CR mode)
Security:
WEP Encryption-64/128/152 bit
WPA/WPA2 Personal (WPA-PSK using TKIP or AES)
WPA/WPA2 Enterprise (WPA-EAP using TKIP)
802.1x Authenticator
Hide SSID in beacons
MAC address filtering, up to 50 field
L2 isolation(AP mode)
Wireless STA (Client) connected list
QoS: WMM
Configuration: Web-based configuration (HTTP)
Firmware Upgrade: Upgrade firmware via web-browser, Keep latest setting when f/w update
Administrator Setting: Administrator password change
Reset Setting: Reboot (Press 1 second), Reset to Factory Default (Press 5 seconds)
System monitoring: Status, Event Log
SNMP: V1, V2c
MIB: MIB I, MIB II (RFC1213)
Backup & Restore: Settings through Web
Time setting: NTP (Auto-setting of time), Time setting manually
Temperature Range: Operating -20°C~70°C
Storage -30°C to 80°C
Humidity (non-condensing): 0%~90% typical
Dimensions: 192mm (L) x 48mm (W) x 36.2mm (H)
Weight: 250g
1x Wireless Access Point
1x Antenna
1x Instruction Manual
1x CD-ROM Drivers
1x Mains Lead
1x Mounting Cups
1x Bracket
2 years manufacturers warranty