STAR TSP100 futurePRNT Thermal Receipt Printer

Often when you buy a printer, you may also need to purchase extra cables or upgrades to software. This can obviously be incredibly frustrating if you’ve just purchased a printer only to find you need to go back to the shop to get another kind of cable. With the TSP100 futurPRNT, you're ready to go.

That’s because literally everything you could possibly need is included in the box at purchase – power and interface cables, wall or vertical mount kit, 58mm paper guide as well as an installation software CD with value added software.

Printer Method: Direct Thermal Line Printing

Print Resolution 203 dpi (8 dots per mm)

2 Colour Print Capability Red / Black, Blue / Black, Green / Black (special paper required)

Number of Columns 48 / 64 or 53 / 71 dependant on print width

Character Set ANK 95, 32 Int 128 Graphic plus Chinese, Japanese, Korean, Taiwanese

International Code Pages Star Mode = 40. ESC/POS™ = 10 + 1 blank allowing an additional character page to be added

Barcodes Extended barcode functionality – 9 versions / PDF417 & Maxicode (pending)

Line Spacing 3mm or 4mm + programmable

Paper Specifications:

Width 80mm Standard, 58 mm with guide fitted

Thickness/Weight 0.065mm ~ 0.085mm / 65 ~ 85gsm

Roll Diameter up to 83mm

Easy-Load “Drop-In & Print”

Paper Out Sensor Standard

Maximum Print Width 80mm paper = 72mm, 58mm paper = 50.8mm

Top Margin 11 mm

Autocutter Guillotine (Partial Cut Only)

Logo Store Capacity Unlimited

Drivers Available Windows™, Mac OSX (10.2 or later), Linux CUPS Support™, OPOS™, JavaPOS™, POS for .NET

Interface / Port USB 2.0, Full Speed, or PoweredUSB Full Speed or Ethernet; Virtual Serial Port for Legacy Applications

Emulation Star Mode, ESC/POS™ (December 2005)

Peripheral Drive Circuit 2 circuits (24V max.1A) 1 Compulsion input

Power Consumption Average 1.6 Amp. Printing, 0.1 Amp. Standby.

Power Supply Internal with power cable supplied

Operating Conditions:

Temperature 5°C to 45° C

Humidity 10% to 90% RH (Without Condensation)

Storage Conditions:

Temperature -20°C to 60°C

Humidity 10% to 90% RH (Without Condensation)

Dimensions 142mm (W) x 204mm (D) x 132mm (H)

Weight:

Auto Cutter Model 1.73Kg

Tear Bar Model 1.56Kg

Safety Standards UL, C-UL, TÜV, FCC, VCCI, EN55022, CE, CB

Reliability:

MCBF 60 Million Lines

Print head 100km

Cutter (Guillotine) 1 Million Cuts

Acccessories / Options No options available as ALL accessories included with printer.

ALL included with Printer Wall Mount Bracket, Auto-Reverse Text Output Software, Vertical Mount Accessory, 58mm Paper Guide, 1.8m Interface Cable, 1.8m Power Cable, Power Switch Cover, Installation CD and Value-Added Software