LABOKEY 5100 ANTI STATIC BLOW GUN

The LABOKEY 5100 Anti-Static Blow Gun integrates an ultra-compact, high voltage power source and discharge electrode. When connected to an air compressor on the market or air piping in the plant, the gun is capable of instantly neutralizing the static charge on the film or prints, and blowing dustt off the surfaces.

Features

• The gun instantly relieves the subject of static charge and blow dust off.
• Adopting high-frequency corona discharge system, the gun efficiently neutralize static electricity at all times(less than +/-15V at 50mm from the subject).
• Corona ion generation system emits little noise and has hardly any effect on electric apparatus or electronic components around the gun.
• The build-in, ultra compact high voltage power source is safely concealed in the unit, and the handy gun weights merely 140g.
• Power input and signal cables are built inside the air-tube to prevent entangling of the cables.
• Supplied with a short and long nozzle, the gun pinpoints subject, even in limited spaces, and blow dust off its surface or relieve it of static charge.
• The on/off switch is light to operate, giving little stress on fingers.
• the switch is operable in two ways:
  • The gun works as long as the switch is depressed(like many similar products on the market).
  • A push on the switch lets the air go, and the second push stops it. The first push holds the gun in continue operation.
• The gun provides an input connector for external signals, and may be operated by the optional foot switch.
• The gun may operate at fixed position by using the dedicated holder. The angle of the gun may shift at every 9°.