5" Paper Spacers for DNP DS-RX1HS, CITIZEN CY & OP900ii (Set of 2)

5″ (5 inch) Paper Spacers for DNP DS-RX1HS, Citizen CY & OP900ii – Set of 2

Allow your DNP DS-RX1HS or Citizen CY / OP900ii printer to accept 5″ (typically 5×7″) roll media perfectly. This pair of precision spacers fills the 1″ gap in a 6″ media cradle, keeping the roll snug and centred for reliable feeding and edge-to-edge printing.

Why use 5″ paper spacers?

• Designed to adapt a 6″ width holder to a 5″ roll — no loose fit, no edge mis-alignment.
• Ensures smooth media feed, which reduces wasted prints, white edges and mis-feeds.
• Ideal for event, wedding or corporate photographers who switch between 4×6″ and 5×7″ formats.

Compatible printers

• DNP DS-RX1HS
• Citizen CY-01 / CY series
• Citizen OP900ii

Note: These spacers are required when using 5″ (5×7″) roll media and are not needed for standard 4×6″ (6″ width) roll formats.

What’s included

• 2 × 5″ paper spacers (one for each side of the roll)

Simple installation

1. Switch off printer and remove any loaded roll.
2. Place one spacer on each side of the paper holders so it sits snugly.
3. Load the roll ensuring the edges sit flush against the spacers.
4. Close the cover and resume printing.

Pro-Tip: Always install both spacers together for accurate alignment and smooth operation.

Technical details

• Intended media width: 5″ (≈127 mm)
• Quantity: Set of two spacers
• SKU: DS5SPXY
• Weight: Approx. 0.50 kg

Who is this for?

Event or studio photographers using DNP DS-RX1HS, Citizen CY or OP900ii printers who want to print 5×7″ roll media with professional results. Also handy for kiosk or mobile operations offering upgraded print formats.

Frequently asked questions

Do I need these if I only print 4×6″?
No – if you're using standard 4×6″ roll media, the holder fits without spacers. These are only required when switching to 5″ roll width.

Can I get by with one spacer?
No – you should install the pair (one each side) so the roll is centred. Using only one will cause feed issues.