iLux™ iPort PE-16NE 3-in-1 (Nikon Hot Shoe) 1 Transmitter 2 Receivers

Nikon transmitter kit - one command transmitter and two receivers. Compatible with Nikon D800, D700, D300, D2, D1, D200, D4, N90s, F5, F6, F100, F90, F90X and Fujifilm S5pro, S3pro.

An additional shutter release cable (SKU: ILRTCN1) is required to connect your camera to the iPort PE-16NE radio flash trigger to complete your wireless set up.

Enables the iPort PE-16NE transmitter to be used as both a wired shutter OR as a wireless shutter remote.

To slave two speedlites (or studio flash units - requires additional cables) from camera, first mount the TX onto the unit to the camera hotshoe. Each RX unit has a standard spigot thread built-in so it will easily mount onto most lighting stands or tripods. Slaved speedlites then sit on the RX unit hotshoe and can be fired in sync.

The TX unit can also be used as a wired shutter release. Hand hold the transmitter but connect the shutter release cable to the camera. When you then press the test button on the TX unit, the shutter will fire and the slave lights fire in sync.

To use the TX unit wirelessly, mount one of the PE-16NE (RX) receivers onto the Camera hot shoe, the second RX unit is connected to the flash unit. You can now trigger BOTH the camera shutter remotely from the transmitter AND trigger the slaved RX unit as well.

Channel selction is set from four dip switches - these are found on both the TX and RX units - simply match the positions on all units to trigger in sync.